La Crosse Technology Clock Radio WS 9014U User Manual

WS-9014U  
Wireless 433 MHz  
Temperature Station  
Instruction Manual  
1
nload from Www.Somanuals.com. All Manuals Search And Downl  
INVENTORY OF CONTENTS  
1. The indoor temperature station (Figure  
1)  
2. The remote temperature sensor (TX6U)  
and mounting bracket. (Figure 2)  
3. 3 each, 1/2” Philips screws.  
4. One strip of double sided adhesive tape.  
5. Instruction Manual and Warranty Card.  
Figure 1  
Figure 2  
ADDITIONAL EQUIPMENT  
(not included)  
1. 1 Philips screwdriver.  
2. 2 Fresh AA 1.5V batteries.  
3. 2 Fresh AA 1.5V batteries.  
3
nload from Www.Somanuals.com. All Manuals Search And Downl  
QUICK SETUP  
Hint: Use good quality Alkaline  
Batteries and avoid rechargeable  
batteries.  
1. Have the indoor  
temperature station and  
remote temperature sensor  
3 to 5 feet apart.  
2. Batteries should be out of  
both units for 10 minutes.  
3. Place the batteries into the  
remote temperature  
sensor first then into the  
indoor temperature station.  
(All remote temperature sensors must be  
started before the indoor temperature  
station)  
4. DO NOT PRESS ANY  
BUTTONS FOR 10  
MINUTES.  
4
nload from Www.Somanuals.com. All Manuals Search And Downl  
In this time the indoor temperature  
station and remote temperature sensor  
will start to talk to each other and the  
display will show both the indoor  
temperature and an outdoor temperature.  
If the indoor temperature station does  
not display both temperatures after the  
10 minutes please retry the set up as  
stated above. After both indoor and  
outdoor temperatures are displayed for  
10 minutes you can place your remote  
temperature sensor outdoors and set  
your time.  
The remote temperature sensor should  
be placed in a dry, shaded area. The  
remote temperature sensor has a range  
of 80 feet. Any walls that the signal  
will have to pass through will reduce  
distance. An outdoor wall or window  
will have 20 to 30 feet of resistance and  
an interior wall will have 10 to 20 feet  
5
nload from Www.Somanuals.com. All Manuals Search And Downl  
of resistance. Your distance plus  
resistance should not exceed 80 ft. in a  
straight line.  
NOTE: Fog and mist will not harm  
your remote temperature sensor but  
direct rain must be avoided.  
To complete the set up of your indoor  
temperature station after the 10 minutes  
have passed please follow the steps  
below.  
1. Press and hold the “SET” button  
for 5 seconds.  
Note: A “12h” or “24h” will appear  
on the top line. (“12h” for AM/PM,  
“24h” for military time)  
a. To change between “12h”  
and “24h” press and  
release the “MIN/MAX”  
button.  
6
nload from Www.Somanuals.com. All Manuals Search And Downl  
b. When you have your  
choice shown on the  
display press and release  
the “SET” button once.  
2. Degree Fahrenheit will now show.  
a. To change between  
Fahrenheit and Celsius,  
press and release the  
“MIN/MAX” button.  
b. When you have your  
choice shown on the  
display press and release  
the “SET” button once.  
3. An hour will now be flashing.  
a. Press and release the  
“MIN/MAX” button until  
the correct hour is shown.  
Note: When in the 12h mode  
there is “PM” displayed under  
the word TIME when in the  
7
nload from Www.Somanuals.com. All Manuals Search And Downl  
PM hours. During the AM  
hours this area will be blank.  
b. When the correct hour is  
shown, press and release  
the “SET” button once.  
4. A minute will now be flashing.  
a. Press and release the  
“MIN/MAX” button until  
the correct minutes are  
displayed.  
Press and release the SET button  
once more and you are done.  
DETAILED SETUP GUIDE  
I. BATTERY INSTALLATION  
A. REMOTE TEMPERATURE  
SENSOR  
8
nload from Www.Somanuals.com. All Manuals Search And Downl  
1. Remove the mounting bracket.  
2. Remove battery cover  
3. Observing the correct polarity, install  
2 AA batteries—make sure they do not  
spring free, or start-up problems may  
occur. Replace cover.  
B. INDOOR TEMPERATURE  
STATION  
Note: After the batteries are installed, DO  
NOT press any buttons. This may interfere  
with the signals, causing temperatures to  
register incorrectly.  
9
nload from Www.Somanuals.com. All Manuals Search And Downl  
1. Remove the battery cover on the  
backside. To do  
this, push up and  
pull out.  
2. Observing the  
correct polarity,  
install 2 AA  
batteries.  
3. Replace battery  
cover.  
4. Wait 10 minutes  
or until both the indoor and outdoor  
temperatures are shown on the indoor  
temperature station.  
5. The indoor  
temperature station  
should now show: “-:- -  
” in the TIME LCD,  
and temperatures in the  
INDOOR and  
OUTDOOR LCD’s.  
10  
nload from Www.Somanuals.com. All Manuals Search And Downl  
II. TIME  
A. SETTING THE TIME  
1. Press and hold  
the “SET”  
button for 5  
second, “12h”  
will appear in  
the TIME LCD.  
2. Press and  
release the  
MIN/MAX” button to select either  
12h time (am/pm) or 24h time  
3. Press and release the “SET” button 2  
times, the hour will flash in the upper  
left corner.  
4. Press and release the “MIN/MAX”  
button to set the hours  
5. Press and release the “SET” button to  
move to the minute setting  
6. Press and release the “MIN/MAX”  
button to set the minutes.  
7. Press and release the “SET” button to  
activate the clock.  
11  
nload from Www.Somanuals.com. All Manuals Search And Downl  
Note: When in 12h mode, there is only a  
“PM” display, which appears under “TIME.”  
If there is no display here it is AM. Make  
sure you set the time accordingly.  
III. UNITS OF TEMPERATURE  
MEASURE  
A. SELECTING UNITS OF  
MEASUREMENT  
1. Press and hold the “SET” button for 5  
second until “12h” or “24h” appears in  
the TIME LCD.  
2. Press and release the “SET” button  
again, “°F” will appear in the TIME  
LCD.  
3. Press and release the “MIN/MAX”  
button to shift between °F and °C.  
4. Press and release the “SET” button  
twice to activate settings.  
12  
nload from Www.Somanuals.com. All Manuals Search And Downl  
IV. FEATURES  
A. MINIMUM AND MAXIMUM  
TEMPERATURES  
1. Press and release the “MIN/MAX”  
button, “MIN” appears in the  
temperature LCD’s and the recorded  
minimum temperatures are displayed.  
2. Press and release the “MIN/MAX”  
button to toggle to the maximum  
temperatures. The time of occurrence  
of the value for outdoor temperature  
will also flash.  
B. RESETTING THE MINIMUM AND  
MAXIMUM TEMPERATURES  
1. To reset both the minimum and  
maximum temperatures—press and  
hold the “RESET/+” button for 4  
seconds.  
C. ADDING ADDITIONAL  
REMOTE TEMPERATURE  
SENSORS (OPTIONAL)  
13  
nload from Www.Somanuals.com. All Manuals Search And Downl  
1. The WS-9014U is able to receive  
signals from 3 different remote  
temperature sensors. Following are  
some brief instructions for the basic  
set-up of remote temperature sensor  
units with the WS-9014U. These extra  
sensors can be purchased through the  
same dealer as this unit, or by  
contacting La Crosse Technology  
directly. A TX6 will monitor  
temperature only, a TX3U will  
monitor temperature and display the  
temperature on its LCD, and the  
TX3UP will monitor the temperature  
via a probe for use in pools, spas, etc.  
Note: When setting up multiple units it  
is important to remove the batteries  
from all existing units in operation,  
then to insert batteries first into all the  
remote temperature sensor units, and in  
numeric sequence. Second, install  
batteries into the indoor temperature  
station. Transmission problems will  
arise if this is not done correctly and if  
14  
nload from Www.Somanuals.com. All Manuals Search And Downl  
the total time for set-up exceeds 6  
minutes.  
2. It is necessary to remove the batteries  
from all units currently in operation.  
3. Remove the battery covers to all  
remote temperature sensor units.  
4. Place all remote temperature sensor  
units in a numeric sequential order.  
5. In sequential order, install batteries  
(follow the same battery installation  
procedures seen in section “I” of the  
Detailed Set-Up Guide).  
6. Install batteries into the indoor  
temperature station.  
7. Follow the Detailed Set-Up Guide for  
programming and operating  
instructions.  
D. VIEWING AND OPERATING  
WITH MULTIPLE REMOTE  
TEMPERATURE SENSOR UNITS  
1. To view the temperature of a different  
remote temperature sensor unit, press  
and release the “CH” button. A shift  
15  
nload from Www.Somanuals.com. All Manuals Search And Downl  
from one “boxed” number to the next  
should be observed in the OUTDOOR  
LCD.  
2. To view the Minimum/Maximum  
temperature: first select from which  
remote temperature sensor to read data  
(indicated by the “boxed” number).  
Pressing and releasing the  
“MIN/MAX” button will toggle  
through the minimum and maximum  
indoor temperature, and the minimum  
and maximum outdoor temperature.  
3. To reset the Minimum/Maximum  
readings, press and hold the  
“MIN/MAX” button for four seconds.  
V. MOUNTING  
Note: To achieve a true temperature  
reading, avoid mounting in direct sunlight.  
We recommend that you mount the remote  
temperature sensor on an outside North-  
facing wall. The sending range is 80ft;  
obstacles such as walls, concrete, and large  
metal objects will reduce the range. Place  
16  
nload from Www.Somanuals.com. All Manuals Search And Downl  
both units in their desired location before  
permanently mounting.  
A. REMOTE TEMPERATURE  
SENSOR  
1. Remove the mounting bracket from  
the remote temperature sensor  
2. Mount using either screws or  
adhesive tape.  
3. Reattach the remote temperature  
sensor to the mounting bracket.  
B. THE TEMPERATURE STATION  
1. The indoor temperature station comes  
with the table stand already mounted.  
If you wish to use the table-stand, all  
that is required is to place the indoor  
temperature station in an appropriate  
location.  
2. To wall mount, remove the table  
stand. To do this, pull down on the  
stand from the rear and rotate forward.  
a) Fix a screw (not included) into the  
desired wall, and place the indoor  
17  
nload from Www.Somanuals.com. All Manuals Search And Downl  
temperature station onto the screw  
using the hanging hole on the  
backside. Gently pull the indoor  
temperature station down to lock the  
screw into place.  
TROUBLESHOOTING  
NOTE: For problems not solved, please  
contact La Crosse Technology via e-mail or  
phone, or visit our website,  
Problem: The LCD is faint  
Solution: Replace batteries  
Problem: No outdoor temperature is  
displayed.  
Solution:  
1) Remove all batteries, reinsert into remote  
temperature sensor first, and then into the  
indoor temperature station.  
2) Place remote temperature sensor closer to  
the indoor temperature station.  
3) Be sure all batteries are fresh.  
18  
nload from Www.Somanuals.com. All Manuals Search And Downl  
4) Place remote temperature sensor and  
indoor temperature station in position so  
the straight-line signal is not passing  
through more than two or three walls.  
Problem: Temperatures do not match if  
units are placed next to each other.  
Solution: Each temperature sensor is  
manufactured to be accurate to within 1  
degree plus or minus and under normal  
conditions; so two temperature sensors could  
be as much as 2 degrees different. However,  
the difference can be exaggerated further  
because the temperature sensors are  
designed for different working  
environments. The indoor sensor is less  
responsive to ambient air currents because of  
the shielding effect of the display's case. In  
addition, the case can act as a heat sink to  
absorb and store heat from external sources  
(i.e. handling of the case or radiant heat). In  
addition, the much greater range of the  
outdoor temperature sensor requires a  
different calibration curve than the indoor  
range. Error is usually greater at the extreme  
19  
nload from Www.Somanuals.com. All Manuals Search And Downl  
ends of a range, making it harder to compare  
different ranges with different curves. Under  
non-laboratory conditions, it is difficult to  
compensate for the above factors and obtain  
an accurate comparison.  
MAINTENANCE AND CARE  
INSTRUCTIONS  
Extreme temperatures, vibration, and  
shock should be avoided to prevent  
damage to the units.  
Clean displays and units with a soft,  
damp cloth. Do not use solvents or  
scouring agents; they may mark the  
displays and casings.  
Do not submerge in water.  
Do not subject the units to unnecessary  
heat or cold by placing them in the  
oven or freezer.  
Opening the casings invalidates the  
warranty. Do not try to repair the unit.  
Contact La Crosse Technology for  
repairs.  
20  
nload from Www.Somanuals.com. All Manuals Search And Downl  
SPECIFICATIONS  
Transmitting  
433MHz  
Frequency  
Measuring Temperatures  
Indoor  
Temperature  
Station: Indoor  
32°F to 156.2°F with  
0.2°F resolution.  
(0°C to 69.0°C with  
0.1°C resolution)  
Indoor  
Temperature  
Station: Outdoor  
-21.8 °F to 156.2°F with  
0.2°F resolution.  
(-29.9°C to 69.0°C with  
0.1°C resolution)  
Temp accuracy  
Transmitting  
range  
+/- 1°F (+/- .5°C)  
Maximum 80 feet (25m)  
open space  
Temperature check  
Indoor  
Outdoor  
Every 10 seconds  
Three times in 10  
minutes  
Batteries—(Alkaline recommended)  
Remote  
2 x AA, 1.5V  
Temperature  
Sensor  
21  
nload from Www.Somanuals.com. All Manuals Search And Downl  
Indoor  
2 x AAA, 1.5V  
Temperature  
Station  
Dimensions: (L x W x H)  
Indoor  
Temperature  
Station  
2.36 x 0.88 x 5.90 in.  
Remote  
Temperature  
Sensor  
1.57 x 0.85 x 5.00 in.  
Approximately 1 year  
Battery life  
WARRANTY INFORMATION  
La Crosse Technology provides a 1-year warranty  
on this weather station. Contact La Crosse  
Technology immediately upon discovery of any  
defects covered by this warranty.  
Before sending the weather station in for repairs,  
contact La Crosse Technology. The weather  
station will be repaired or replaced with the same  
or similar model.  
22  
nload from Www.Somanuals.com. All Manuals Search And Downl  
This warranty does not cover any defects resulting  
from improper use, unauthorized repairs, faulty  
batteries, or the weather stations inability to  
receive a signal due to any source of interference.  
LA CROSSE TECHNOLOGY WILL NOT  
ASSUME LIABILITY FOR INCIDENTAL,  
CONSEQUENTIAL, PUNITIVE, OR OTHER  
SIMILAR DAMAGES ASSOCIATED WITH  
THE OPERATION OR MALFUNCTION OF  
THIS WEATHER STATION. THIS PRODUCT  
IS NOT TO BE USED FOR MEDICAL  
PURPOSES OR FOR PUBLIC INFORMATION.  
THIS PRODUCT IS NOT A TOY. KEEP OUT  
OF CHILDREN’S REACH.  
This warranty gives you specific legal rights. You  
may also have other rights specific to your State.  
Some States do no allow the exclusion of  
consequential or incidental damages therefore the  
above exclusion of limitation may not apply to  
you.  
For warranty work, technical support, or  
information contact:  
La Crosse Technology  
2809 Losey Blvd. S.  
La Crosse, WI 54601  
23  
nload from Www.Somanuals.com. All Manuals Search And Downl  
Phone: 608.782.1610  
Fax: 608.796.1020  
e-mail:  
(warranty work)  
(information on other products)  
web:  
FCC DISCLAIMER  
This device complies with part 15 of  
the FCC rules. Operation is subject to the  
following two conditions: (1) this device may not  
cause harmful interference, and (2) this device  
must accept any interference received, including  
interference that may cause undesired operation.  
Freq. 433.92 MHz  
La Crosse Technology  
Made in China  
WS-9014U  
24  
nload from Www.Somanuals.com. All Manuals Search And Downl  
FCC ID: OMO-01RX (Receiver),  
OMO-01TX (transmitter)  
THIS DEVICE COMPLIES WITH PART 15  
OF THE FCC RULES. OPERATION IS  
SUBJECT TO THE FOLLOWING TWO  
CONDITIONS:  
1. THIS DEVICE MAY NOT CAUSE  
HARMFUL INTERFERENCE, AND  
2. THIS DEVICE MUST ACCEPT  
INTERFERENCE RECEIVED, INCLUDING  
INTERFERENCE THAT MAY CAUSE  
UNDESIRED OPERATION.  
25  
nload from Www.Somanuals.com. All Manuals Search And Downl  

Legend Audio Stereo Amplifier ISA 828 User Manual
Lenovo Computer Monitor C92 User Manual
Liebert Clothes Dryer 1010 User Manual
Loewe Car Satellite TV System 32 User Manual
Lowrance electronic CD Player X 3 User Manual
M Audio Electronic Keyboard DCP 300 User Manual
Melissa Skin Care Product 638 135 User Manual
Memorex Answering Machine MPH2089 User Manual
Mercury Marine Boat 899183001 User Manual
Meyer Sound Speaker System UM 100P User Manual