Mackie Home Theater System ART200A User Manual

Specifications  
ART200A  
System:  
Voice Equalization:  
+4.0 dB @ 3kHz  
Active Speaker System  
Freq. Range (–10 dB):  
50Hz-19kHz  
+4.0 dB @ 6kHz  
Quick-Start Guide  
The ART200A is a full-range two-way  
professional active speaker system that  
combines high power and wide bandwidth in  
a light-weight enclosure for fixed-installation  
systems. The 12" low-frequency transducer, in  
combination with a 1" compression driver  
coupled to an integral 90˚ x 70˚ constant  
directivity polynomial horn, form an extremely  
powerful package for any small to medium-  
sized sound reinforcement application.  
It features a balanced XLR input with a  
Mic/Line switch and a paralleled balanced  
XLR output for cascading multiple speakers.  
Rear panel controls also include Music and  
Voice equalization switches, a rotary volume  
control, and an input limiter.  
The two built-in power amplifiers provide  
120W for the LF driver and 40W for the HF  
driver. The enclosure is constructed of high-  
strength polypropylene, with M10 threaded  
inserts on all four sides for rigging, and an  
integral locking 1-3/8" socket in the bottom  
for mounting on a standard speaker stand.  
Indicators:  
Freq. Response ( 3 dB):  
70Hz-17kHz  
Power ON, Limiter  
Amplifiers:  
Horz. Coverage Angle (–6 dB):  
LF Amplifier Power:  
90°, averaged 1kHz-10kHz  
120 watts RMS  
Vert. Coverage Angle (–6 dB):  
HF Amplifier Power:  
70°, averaged 1kHz-10kHz  
Directivity Factor Q (DI):  
40 watts RMS  
Distortion:  
9.5 (9.8), averaged 1kHz-10kHz  
< 0.1% THD at rated power  
System Sensitivity:  
Amp Protection:  
101 dB, 1W@1m  
Rated Maximum SPL:  
Thermal, limiter, short circuit  
Power Supply:  
122 dB @ 1 m (3.3 ft) peak  
115/230 VAC, 2A, 50/60 Hz  
HF Protection:  
Dynamic  
Physical:  
Enclosure:  
Transducers:  
Asymmetrical trapezoidal,  
reinforced polypropylene  
Low Frequency:  
12" (300 mm) diameter woofer  
Mounting:  
High Frequency:  
Lockable 1-3/8" (35mm) stand  
mount  
1" (25 mm) compression driver,  
horn loaded  
Safety First!  
Before connecting and using the  
Rigging Inserts:  
4 points, accepts M10 threaded  
1. Never install, connect, or disconnect  
the unit with the power supply on.  
equipment, please read this Quick-Start Guide  
carefully and keep it for future reference.  
hardware  
Preamp and Processor:  
Input/Output Connectors:  
2 XLR balanced  
2. Before powering up the speaker,  
make sure the voltage select switch  
corresponds to the AC Voltage supply.  
Input Sensitivity:  
Mic In:  
Line In:  
8mV  
125mV  
WARNING! This equipment has been  
designed to be installed by qualified  
Dimensions HxWxD:  
professionals only! There are many factors to  
be considered when installing professional  
sound reinforcement systems, including  
mechanical and electrical considerations, as  
well as acoustic coverage and performance.  
Mackie Industrial strongly recommends that  
this equipment be installed only by a  
24.4" x 15.4" x 12.3"  
(620 mm x 390 mm x 312 mm)  
Input Impedance:  
Mic In:  
3. Make sure the safety ground on the  
power cord is properly grounded.  
650unbalanced  
1.3kbalanced  
Net Weight:  
4. To prevent the risk of electric shock,  
never open the unit. There are no  
user serviceable parts inside.  
39.7 lb (18.0 kg)  
Line In:  
10kunbalanced  
19kbalanced  
Crossover Frequency and Slope:  
1.8kHz; 24 dB/octave  
5. To ensure normal cooling of the  
amplifier, make sure the unit is well-  
ventilated. Avoid exposure to direct  
sunlight or proximity to any heat  
source, dust, or dampness.  
professional sound installer or contractor.  
Time Alignment:  
16220 Wood-Red Road NE Woodinville, WA 98072  
TEL +888.337.7404, FAX +425.487.4337  
UK +44.1268.570.808, FAX +44.1268.570.809 [email protected]  
ITALY +39.0522.354.111, FAX +39.0522.332.294 [email protected]  
FRANCE +33.3.8546.9160, FAX +33.3.8546.9161 [email protected]  
GERMANY +49.2572.96042.0, FAX +49.2572.96042.10 [email protected]  
Analog, 0.3 ms HF delay  
Speaker Protection:  
CAUTION: To avoid the risk of electric  
shock, never allow this equipment to  
be exposed to rain or dampness.  
Thermal, over-excursion  
Music Equalization:  
+4.3 dB @ 65Hz  
+4.0 dB @ 12kHz  
Part No. 910-161-20 Rev. A 2/00  
© 2000 Mackie Industrial. All Rights Reserved. Printed in the USA.  
 

Lasko Fan 2648 User Manual
Legacy Car Audio Car Amplifier LA1038 User Manual
Lennox Hearth Stove BELLA PK GV User Manual
Liebert Surge Protector Integrated Secured Protection User Manual
Life Fitness Bicycle LCRT8 0XXX 01 User Manual
Lochinvar Water Heater RPV Iamp;S User Manual
Magnavox DVD Recorder MDV630R User Manual
Makita Grinder 9501BKLT User Manual
Melissa Scale 246 031 User Manual
Mellerware Kitchen Utensil 26602 User Manual